Apache HTTP Server Version 2.0
Description: | Core Apache HTTP Server features that are always available |
---|---|
Status: | Core |
Description: | Resources accept trailing pathname information |
---|---|
Syntax: | AcceptPathInfo On|Off|Default |
Default: | AcceptPathInfo Default |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
Compatibility: | Available in Apache 2.0.30 and later |
This directive controls whether requests that contain trailing pathname information that follows an actual filename (or non-existent file in an existing directory) will be accepted or rejected. The trailing pathname information can be made available to scripts in the PATH_INFO
environment variable.
For example, assume the location /test/
points to a directory that contains only the single file here.html
. Then requests for /test/here.html/more
and /test/nothere.html/more
both collect /more
as PATH_INFO
.
The three possible arguments for the AcceptPathInfo
directive are:
Off
/test/here.html/more
in the above example will return a 404 NOT FOUND error.On
/test/here.html/more
will be accepted if /test/here.html
maps to a valid file.Default
PATH_INFO
requests. Handlers that serve scripts, such as cgi-script and isapi-handler, generally accept PATH_INFO
by default.The primary purpose of the AcceptPathInfo
directive is to allow you to override the handler's choice of accepting or rejecting PATH_INFO
. This override is required, for example, when you use a filter, such as INCLUDES, to generate content based on PATH_INFO
. The core handler would usually reject the request, so you can use the following configuration to enable such a script:
<Files "mypaths.shtml">
Options +Includes
SetOutputFilter INCLUDES
AcceptPathInfo On
</Files>
Description: | Name of the distributed configuration file |
---|---|
Syntax: | AccessFileName filename [filename] ... |
Default: | AccessFileName .htaccess |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
While processing a request the server looks for the first existing configuration file from this list of names in every directory of the path to the document, if distributed configuration files are enabled for that directory. For example:
AccessFileName .acl
before returning the document /usr/local/web/index.html
, the server will read /.acl
, /usr/.acl
, /usr/local/.acl
and /usr/local/web/.acl
for directives, unless they have been disabled with
<Directory />
AllowOverride None
</Directory>
Description: | Default charset parameter to be added when a response content-type is text/plain or text/html |
---|---|
Syntax: | AddDefaultCharset On|Off|charset |
Default: | AddDefaultCharset Off |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
This directive specifies a default value for the media type charset parameter (the name of a character encoding) to be added to a response if and only if the response's content-type is either text/plain
or text/html
. This should override any charset specified in the body of the response via a META
element, though the exact behavior is often dependent on the user's client configuration. A setting of AddDefaultCharset Off
disables this functionality. AddDefaultCharset On
enables a default charset of iso-8859-1
. Any other value is assumed to be the charset to be used, which should be one of the IANA registered charset values for use in MIME media types. For example:
AddDefaultCharset utf-8
AddDefaultCharset
should only be used when all of the text resources to which it applies are known to be in that character encoding and it is too inconvenient to label their charset individually. One such example is to add the charset parameter to resources containing generated content, such as legacy CGI scripts, that might be vulnerable to cross-site scripting attacks due to user-provided data being included in the output. Note, however, that a better solution is to just fix (or delete) those scripts, since setting a default charset does not protect users that have enabled the "auto-detect character encoding" feature on their browser.
Description: | assigns an output filter to a particular MIME-type |
---|---|
Syntax: | AddOutputFilterByType filter[;filter...] MIME-type [MIME-type] ... |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
Compatibility: | Available in Apache 2.0.33 and later |
This directive activates a particular output filter for a request depending on the response MIME-type.
The following example uses the DEFLATE
filter, which is provided by mod_deflate
. It will compress all output (either static or dynamic) which is labeled as text/html
or text/plain
before it is sent to the client.
AddOutputFilterByType DEFLATE text/html text/plain
If you want the content to be processed by more than one filter, their names have to be separated by semicolons. It's also possible to use one AddOutputFilterByType
directive for each of these filters.
The configuration below causes all script output labeled as text/html
to be processed at first by the INCLUDES
filter and then by the DEFLATE
filter.
<Location /cgi-bin/>
Options Includes
AddOutputFilterByType INCLUDES;DEFLATE text/html
</Location>
Enabling filters with AddOutputFilterByType
may fail partially or completely in some cases. For example, no filters are applied if the MIME-type could not be determined and falls back to the DefaultType
setting, even if the DefaultType
is the same.
However, if you want to make sure, that the filters will be applied, assign the content type to a resource explicitly, for example with AddType
or ForceType
. Setting the content type within a (non-nph) CGI script is also safe.
The by-type output filters are never applied on proxy requests.
Description: | Determines whether encoded path separators in URLs are allowed to be passed through |
---|---|
Syntax: | AllowEncodedSlashes On|Off |
Default: | AllowEncodedSlashes Off |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
Compatibility: | Available in Apache 2.0.46 and later |
The AllowEncodedSlashes
directive allows URLs which contain encoded path separators (%2F
for /
and additionally %5C
for \
on according systems) to be used. Normally such URLs are refused with a 404 (Not found) error.
Turning AllowEncodedSlashes
On
is mostly useful when used in conjunction with PATH_INFO
.
Allowing encoded slashes does not imply decoding. Occurrences of %2F
or %5C
(only on according systems) will be left as such in the otherwise decoded URL string.
Description: | Types of directives that are allowed in .htaccess files |
---|---|
Syntax: | AllowOverride All|None|directive-type [directive-type] ... |
Default: | AllowOverride All |
Context: | directory |
Status: | Core |
Module: | core |
When the server finds an .htaccess
file (as specified by AccessFileName
) it needs to know which directives declared in that file can override earlier configuration directives.
AllowOverride
is valid only in <Directory>
sections specified without regular expressions, not in <Location>
, <DirectoryMatch>
or <Files>
sections.
When this directive is set to None
, then .htaccess files are completely ignored. In this case, the server will not even attempt to read .htaccess
files in the filesystem.
When this directive is set to All
, then any directive which has the .htaccess Context is allowed in .htaccess
files.
The directive-type can be one of the following groupings of directives.
AuthDBMGroupFile
, AuthDBMUserFile
, AuthGroupFile
, AuthName
, AuthType
, AuthUserFile
, Require
, etc.).DefaultType
, ErrorDocument
, ForceType
, LanguagePriority
, SetHandler
, SetInputFilter
, SetOutputFilter
, and mod_mime
Add* and Remove* directives, etc.).AddDescription
, AddIcon
, AddIconByEncoding
, AddIconByType
, DefaultIcon
, DirectoryIndex
, FancyIndexing
, HeaderName
, IndexIgnore
, IndexOptions
, ReadmeName
, etc.).Allow
, Deny
and Order
).Options
and XBitHack
).Example:
AllowOverride AuthConfig Indexes
In the example above all directives that are neither in the group AuthConfig
nor Indexes
cause an internal server error.
Description: | Authorization realm for use in HTTP authentication |
---|---|
Syntax: | AuthName auth-domain |
Context: | directory, .htaccess |
Override: | AuthConfig |
Status: | Core |
Module: | core |
This directive sets the name of the authorization realm for a directory. This realm is given to the client so that the user knows which username and password to send. AuthName
takes a single argument; if the realm name contains spaces, it must be enclosed in quotation marks. It must be accompanied by AuthType
and Require
directives, and directives such as AuthUserFile
and AuthGroupFile
to work.
For example:
AuthName "Top Secret"
The string provided for the AuthName
is what will appear in the password dialog provided by most browsers.
Description: | Type of user authentication |
---|---|
Syntax: | AuthType Basic|Digest |
Context: | directory, .htaccess |
Override: | AuthConfig |
Status: | Core |
Module: | core |
This directive selects the type of user authentication for a directory. Only Basic
and Digest
are currently implemented. It must be accompanied by AuthName
and Require
directives, and directives such as AuthUserFile
and AuthGroupFile
to work.
Description: | Technique for locating the interpreter for CGI scripts |
---|---|
Syntax: | CGIMapExtension cgi-path .extension |
Context: | directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
Compatibility: | NetWare only |
This directive is used to control how Apache finds the interpreter used to run CGI scripts. For example, setting CGIMapExtension sys:\foo.nlm .foo
will cause all CGI script files with a .foo
extension to be passed to the FOO interpreter.
Description: | Enables the generation of Content-MD5 HTTP Response headers |
---|---|
Syntax: | ContentDigest On|Off |
Default: | ContentDigest Off |
Context: | server config, virtual host, directory, .htaccess |
Override: | Options |
Status: | Core |
Module: | core |
This directive enables the generation of Content-MD5
headers as defined in RFC1864 respectively RFC2068.
MD5 is an algorithm for computing a "message digest" (sometimes called "fingerprint") of arbitrary-length data, with a high degree of confidence that any alterations in the data will be reflected in alterations in the message digest.
The Content-MD5
header provides an end-to-end message integrity check (MIC) of the entity-body. A proxy or client may check this header for detecting accidental modification of the entity-body in transit. Example header:
Content-MD5: AuLb7Dp1rqtRtxz2m9kRpA==
Note that this can cause performance problems on your server since the message digest is computed on every request (the values are not cached).
Content-MD5
is only sent for documents served by the core
, and not by any module. For example, SSI documents, output from CGI scripts, and byte range responses do not have this header.
Description: | MIME content-type that will be sent if the server cannot determine a type in any other way |
---|---|
Syntax: | DefaultType MIME-type |
Default: | DefaultType text/plain |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
There will be times when the server is asked to provide a document whose type cannot be determined by its MIME types mappings.
The server must inform the client of the content-type of the document, so in the event of an unknown type it uses the DefaultType
. For example:
DefaultType image/gif
would be appropriate for a directory which contained many GIF images with filenames missing the .gif
extension.
Note that unlike ForceType
, this directive only provides the default mime-type. All other mime-type definitions, including filename extensions, that might identify the media type will override this default.
Description: | Enclose a group of directives that apply only to the named file-system directory and sub-directories |
---|---|
Syntax: | <Directory directory-path> ... </Directory> |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
<Directory>
and </Directory>
are used to enclose a group of directives that will apply only to the named directory and sub-directories of that directory. Any directive that is allowed in a directory context may be used. Directory-path is either the full path to a directory, or a wild-card string using Unix shell-style matching. In a wild-card string, ?
matches any single character, and *
matches any sequences of characters. You may also use []
character ranges. None of the wildcards match a `/' character, so <Directory /*/public_html>
will not match /home/user/public_html
, but <Directory /home/*/public_html>
will match. Example:
<Directory /usr/local/httpd/htdocs>
Options Indexes FollowSymLinks
</Directory>
Be careful with the directory-path arguments: They have to literally match the filesystem path which Apache uses to access the files. Directives applied to a particular <Directory>
will not apply to files accessed from that same directory via a different path, such as via different symbolic links.
Extended regular expressions can also be used, with the addition of the ~
character. For example:
<Directory ~ "^/www/.*/[0-9]{3}">
would match directories in /www/
that consisted of three numbers.
If multiple (non-regular expression) <Directory>
sections match the directory (or one of its parents) containing a document, then the directives are applied in the order of shortest match first, interspersed with the directives from the .htaccess files. For example, with
<Directory />
AllowOverride None
</Directory>
<Directory /home/>
AllowOverride FileInfo
</Directory>
for access to the document /home/web/dir/doc.html
the steps are:
AllowOverride None
(disabling .htaccess
files).AllowOverride FileInfo
(for directory /home
).FileInfo
directives in /home/.htaccess
, /home/web/.htaccess
and /home/web/dir/.htaccess
in that order.Regular expressions are not considered until after all of the normal sections have been applied. Then all of the regular expressions are tested in the order they appeared in the configuration file. For example, with
<Directory ~ abc$>
# ... directives here ...
</Directory>
the regular expression section won't be considered until after all normal <Directory>
s and .htaccess
files have been applied. Then the regular expression will match on /home/abc/public_html/abc
and the corresponding <Directory>
will be applied.
Note that the default Apache access for <Directory />
is Allow from All
. This means that Apache will serve any file mapped from an URL. It is recommended that you change this with a block such as
<Directory />
Order Deny,Allow
Deny from All
</Directory>
and then override this for directories you want accessible. See the Security Tips page for more details.
The directory sections occur in the httpd.conf
file. <Directory>
directives cannot nest, and cannot appear in a <Limit>
or <LimitExcept>
section.
Description: | Enclose directives that apply to file-system directories matching a regular expression and their subdirectories |
---|---|
Syntax: | <DirectoryMatch regex> ... </DirectoryMatch> |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
<DirectoryMatch>
and </DirectoryMatch>
are used to enclose a group of directives which will apply only to the named directory and sub-directories of that directory, the same as <Directory>
. However, it takes as an argument a regular expression. For example:
<DirectoryMatch "^/www/(.+/)?[0-9]{3}">
would match directories in /www/
that consisted of three numbers.
<Directory>
for a description of how regular expressions are mixed in with normal <Directory>
sDescription: | Directory that forms the main document tree visible from the web |
---|---|
Syntax: | DocumentRoot directory-path |
Default: | DocumentRoot /usr/local/apache/htdocs |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
This directive sets the directory from which httpd
will serve files. Unless matched by a directive like Alias
, the server appends the path from the requested URL to the document root to make the path to the document. Example:
DocumentRoot /usr/web
then an access to http://www.my.host.com/index.html
refers to /usr/web/index.html
.
The DocumentRoot
should be specified without a trailing slash.
Description: | Use memory-mapping to read files during delivery |
---|---|
Syntax: | EnableMMAP On|Off |
Default: | EnableMMAP On |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
This directive controls whether the httpd
may use memory-mapping if it needs to read the contents of a file during delivery. By default, when the handling of a request requires access to the data within a file -- for example, when delivering a server-parsed file using mod_include
-- Apache memory-maps the file if the OS supports it.
This memory-mapping sometimes yields a performance improvement. But in some environments, it is better to disable the memory-mapping to prevent operational problems:
httpd
.DocumentRoot
, the httpd
may crash due to a segmentation fault if a file is deleted or truncated while the httpd
has it memory-mapped.For server configurations that are vulnerable to these problems, you should disable memory-mapping of delivered files by specifying:
EnableMMAP Off
For NFS mounted files, this feature may be disabled explicitly for the offending files by specifying:
<Directory "/path-to-nfs-files"> EnableMMAP Off </Directory>
Description: | Use the kernel sendfile support to deliver files to the client |
---|---|
Syntax: | EnableSendfile On|Off |
Default: | EnableSendfile On |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
Compatibility: | Available in version 2.0.44 and later |
This directive controls whether httpd
may use the sendfile support from the kernel to transmit file contents to the client. By default, when the handling of a request requires no access to the data within a file -- for example, when delivering a static file -- Apache uses sendfile to deliver the file contents without ever reading the file if the OS supports it.
This sendfile mechanism avoids separate read and send operations, and buffer allocations. But on some platforms or within some filesystems, it is better to disable this feature to avoid operational problems:
DocumentRoot
(e.g., NFS or SMB), the kernel may be unable to serve the network file through its own cache.For server configurations that are vulnerable to these problems, you should disable this feature by specifying:
EnableSendfile Off
For NFS or SMB mounted files, this feature may be disabled explicitly for the offending files by specifying:
<Directory "/path-to-nfs-files"> EnableSendfile Off </Directory>
Description: | What the server will return to the client in case of an error |
---|---|
Syntax: | ErrorDocument error-code document |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
Compatibility: | Quoting syntax for text messages is different in Apache 2.0 |
In the event of a problem or error, Apache can be configured to do one of four things,
The first option is the default, while options 2-4 are configured using the ErrorDocument
directive, which is followed by the HTTP response code and a URL or a message. Apache will sometimes offer additional information regarding the problem/error.
URLs can begin with a slash (/) for local web-paths (relative to the DocumentRoot
), or be a full URL which the client can resolve. Alternatively, a message can be provided to be displayed by the browser. Examples:
ErrorDocument 500 http://foo.example.com/cgi-bin/tester
ErrorDocument 404 /cgi-bin/bad_urls.pl
ErrorDocument 401 /subscription_info.html
ErrorDocument 403 "Sorry can't allow you access today"
Additionally, the special value default
can be used to specify Apache's simple hardcoded message. While not required under normal circumstances, default
will restore Apache's simple hardcoded message for configurations that would otherwise inherit an existing ErrorDocument
.
ErrorDocument 404 /cgi-bin/bad_urls.pl
<Directory /web/docs>
ErrorDocument 404 default
</Directory>
Note that when you specify an ErrorDocument
that points to a remote URL (ie. anything with a method such as http
in front of it), Apache will send a redirect to the client to tell it where to find the document, even if the document ends up being on the same server. This has several implications, the most important being that the client will not receive the original error status code, but instead will receive a redirect status code. This in turn can confuse web robots and other clients which try to determine if a URL is valid using the status code. In addition, if you use a remote URL in an ErrorDocument 401
, the client will not know to prompt the user for a password since it will not receive the 401 status code. Therefore, if you use an ErrorDocument 401
directive then it must refer to a local document.
Microsoft Internet Explorer (MSIE) will by default ignore server-generated error messages when they are "too small" and substitute its own "friendly" error messages. The size threshold varies depending on the type of error, but in general, if you make your error document greater than 512 bytes, then MSIE will show the server-generated error rather than masking it. More information is available in Microsoft Knowledge Base article Q294807.
Although most error messages can be overriden, there are certain circumstances where the internal messages are used regardless of the setting of ErrorDocument
. In particular, if a malformed request is detected, normal request processing will be immediately halted and the internal error message returned. This is necessary to guard against security problems caused by bad requests.
Prior to version 2.0, messages were indicated by prefixing them with a single unmatched double quote character.
Description: | Location where the server will log errors |
---|---|
Syntax: | ErrorLog file-path|syslog[:facility] |
Default: | ErrorLog logs/error_log (Unix) ErrorLog logs/error.log (Windows and OS/2) |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
The ErrorLog
directive sets the name of the file to which the server will log any errors it encounters. If the file-path is not absolute then it is assumed to be relative to the ServerRoot
.
ErrorLog /var/log/httpd/error_log
If the file-path begins with a pipe (|) then it is assumed to be a command to spawn to handle the error log.
ErrorLog "|/usr/local/bin/httpd_errors"
Using syslog
instead of a filename enables logging via syslogd(8) if the system supports it. The default is to use syslog facility local7
, but you can override this by using the syslog:facility
syntax where facility can be one of the names usually documented in syslog(1).
ErrorLog syslog:user
SECURITY: See the security tips document for details on why your security could be compromised if the directory where log files are stored is writable by anyone other than the user that starts the server.
When entering a file path on non-Unix platforms, care should be taken to make sure that only forward slashed are used even though the platform may allow the use of back slashes. In general it is a good idea to always use forward slashes throughout the configuration files.
Description: | File attributes used to create the ETag HTTP response header |
---|---|
Syntax: | FileETag component ... |
Default: | FileETag INode MTime Size |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
The FileETag
directive configures the file attributes that are used to create the ETag
(entity tag) response header field when the document is based on a file. (The ETag
value is used in cache management to save network bandwidth.) In Apache 1.3.22 and earlier, the ETag
value was always formed from the file's inode, size, and last-modified time (mtime). The FileETag
directive allows you to choose which of these -- if any -- should be used. The recognized keywords are:
FileETag INode MTime Size
ETag
field will be included in the responseThe INode
, MTime
, and Size
keywords may be prefixed with either +
or -
, which allow changes to be made to the default setting inherited from a broader scope. Any keyword appearing without such a prefix immediately and completely cancels the inherited setting.
If a directory's configuration includes FileETag INode MTime Size
, and a subdirectory's includes FileETag -INode
, the setting for that subdirectory (which will be inherited by any sub-subdirectories that don't override it) will be equivalent to FileETag MTime Size
.
Description: | Contains directives that apply to matched filenames |
---|---|
Syntax: | <Files filename> ... </Files> |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
The <Files>
directive limits the scope of the enclosed directives by filename. It is comparable to the <Directory>
and <Location>
directives. It should be matched with a </Files>
directive. The directives given within this section will be applied to any object with a basename (last component of filename) matching the specified filename. <Files>
sections are processed in the order they appear in the configuration file, after the <Directory>
sections and .htaccess
files are read, but before <Location>
sections. Note that <Files>
can be nested inside <Directory>
sections to restrict the portion of the filesystem they apply to.
The filename argument should include a filename, or a wild-card string, where ?
matches any single character, and *
matches any sequences of characters. Extended regular expressions can also be used, with the addition of the ~
character. For example:
<Files ~ "\.(gif|jpe?g|png)$">
would match most common Internet graphics formats. <FilesMatch>
is preferred, however.
Note that unlike <Directory>
and <Location>
sections, <Files>
sections can be used inside .htaccess
files. This allows users to control access to their own files, at a file-by-file level.
Description: | Contains directives that apply to regular-expression matched filenames |
---|---|
Syntax: | <FilesMatch regex> ... </FilesMatch> |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
The <FilesMatch>
directive limits the scope of the enclosed directives by filename, just as the <Files>
directive does. However, it accepts a regular expression. For example:
<FilesMatch "\.(gif|jpe?g|png)$">
would match most common Internet graphics formats.
Description: | Forces all matching files to be served with the specified MIME content-type |
---|---|
Syntax: | ForceType MIME-type|None |
Context: | directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
Compatibility: | Moved to the core in Apache 2.0 |
When placed into an .htaccess
file or a <Directory>
, or <Location>
or <Files>
section, this directive forces all matching files to be served with the content type identification given by MIME-type. For example, if you had a directory full of GIF files, but did not want to label them all with .gif
, you might want to use:
ForceType image/gif
Note that unlike DefaultType
, this directive overrides all mime-type associations, including filename extensions, that might identify the media type.
You can override any ForceType
setting by using the value of None
:
# force all files to be image/gif:
<Location /images>
ForceType image/gif
</Location>
# but normal mime-type associations here:
<Location /images/mixed>
ForceType None
</Location>
Description: | Enables DNS lookups on client IP addresses |
---|---|
Syntax: | HostnameLookups On|Off|Double |
Default: | HostnameLookups Off |
Context: | server config, virtual host, directory |
Status: | Core |
Module: | core |
This directive enables DNS lookups so that host names can be logged (and passed to CGIs/SSIs in REMOTE_HOST
). The value Double
refers to doing double-reverse DNS lookup. That is, after a reverse lookup is performed, a forward lookup is then performed on that result. At least one of the IP addresses in the forward lookup must match the original address. (In "tcpwrappers" terminology this is called PARANOID
.)
Regardless of the setting, when mod_access
is used for controlling access by hostname, a double reverse lookup will be performed. This is necessary for security. Note that the result of this double-reverse isn't generally available unless you set HostnameLookups Double
. For example, if only HostnameLookups On
and a request is made to an object that is protected by hostname restrictions, regardless of whether the double-reverse fails or not, CGIs will still be passed the single-reverse result in REMOTE_HOST
.
The default is Off
in order to save the network traffic for those sites that don't truly need the reverse lookups done. It is also better for the end users because they don't have to suffer the extra latency that a lookup entails. Heavily loaded sites should leave this directive Off
, since DNS lookups can take considerable amounts of time. The utility logresolve
, compiled by default to the bin
subdirectory of your installation directory, can be used to look up host names from logged IP addresses offline.
Description: | Enables logging of the RFC1413 identity of the remote user |
---|---|
Syntax: | IdentityCheck On|Off |
Default: | IdentityCheck Off |
Context: | server config, virtual host, directory |
Status: | Core |
Module: | core |
This directive enables RFC1413-compliant logging of the remote user name for each connection, where the client machine runs identd or something similar. This information is logged in the access log.
The information should not be trusted in any way except for rudimentary usage tracking.
Note that this can cause serious latency problems accessing your server since every request requires one of these lookups to be performed. When firewalls are involved each lookup might possibly fail and add 30 seconds of latency to each hit. So in general this is not very useful on public servers accessible from the Internet.
Description: | Encloses directives that will be processed only if a test is true at startup |
---|---|
Syntax: | <IfDefine [!]parameter-name> ... </IfDefine> |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
The <IfDefine test>...</IfDefine>
section is used to mark directives that are conditional. The directives within an <IfDefine>
section are only processed if the test is true. If test is false, everything between the start and end markers is ignored.
The test in the <IfDefine>
section directive can be one of two forms:
!
parameter-nameIn the former case, the directives between the start and end markers are only processed if the parameter named parameter-name is defined. The second format reverses the test, and only processes the directives if parameter-name is not defined.
The parameter-name argument is a define as given on the httpd
command line via -Dparameter-
, at the time the server was started.
<IfDefine>
sections are nest-able, which can be used to implement simple multiple-parameter tests. Example:
httpd -DReverseProxy ...
# httpd.conf
<IfDefine ReverseProxy>
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/libproxy.so
</IfDefine>
Description: | Encloses directives that are processed conditional on the presence or absence of a specific module |
---|---|
Syntax: | <IfModule [!]module-name> ... </IfModule> |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
The <IfModule test>...</IfModule>
section is used to mark directives that are conditional on the presence of a specific module. The directives within an <IfModule>
section are only processed if the test is true. If test is false, everything between the start and end markers is ignored.
The test in the <IfModule>
section directive can be one of two forms:
In the former case, the directives between the start and end markers are only processed if the module named module name is included in Apache -- either compiled in or dynamically loaded using LoadModule
. The second format reverses the test, and only processes the directives if module name is not included.
The module name argument is the file name of the module, at the time it was compiled. For example, mod_rewrite.c
. If a module consists of several source files, use the name of the file containing the string STANDARD20_MODULE_STUFF
.
<IfModule>
sections are nest-able, which can be used to implement simple multiple-module tests.
<IfModule>
sections.
Description: | Includes other configuration files from within the server configuration files |
---|---|
Syntax: | Include file-path|directory-path |
Context: | server config, virtual host, directory |
Status: | Core |
Module: | core |
Compatibility: | Wildcard matching available in 2.0.41 and later |
This directive allows inclusion of other configuration files from within the server configuration files.
Shell-style (fnmatch()
) wildcard characters can be used to include several files at once, in alphabetical order. In addition, if Include
points to a directory, rather than a file, Apache will read all files in that directory and any subdirectory. But including entire directories is not recommended, because it is easy to accidentally leave temporary files in a directory that can cause httpd
to fail.
The file path specified may be an absolute path, or may be relative to the ServerRoot
directory.
Examples:
Include /usr/local/apache2/conf/ssl.conf
Include /usr/local/apache2/conf/vhosts/*.conf
Or, providing paths relative to your ServerRoot
directory:
Include conf/ssl.conf
Include conf/vhosts/*.conf
Running apachectl configtest
will give you a list of the files that are being processed during the configuration check:
root@host# apachectl configtest
Processing config file: /usr/local/apache2/conf/ssl.conf
Processing config file: /usr/local/apache2/conf/vhosts/vhost1.conf
Processing config file: /usr/local/apache2/conf/vhosts/vhost2.conf
Syntax OK
Description: | Enables HTTP persistent connections |
---|---|
Syntax: | KeepAlive On|Off |
Default: | KeepAlive On |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
The Keep-Alive extension to HTTP/1.0 and the persistent connection feature of HTTP/1.1 provide long-lived HTTP sessions which allow multiple requests to be sent over the same TCP connection. In some cases this has been shown to result in an almost 50% speedup in latency times for HTML documents with many images. To enable Keep-Alive connections, set KeepAlive On
.
For HTTP/1.0 clients, Keep-Alive connections will only be used if they are specifically requested by a client. In addition, a Keep-Alive connection with an HTTP/1.0 client can only be used when the length of the content is known in advance. This implies that dynamic content such as CGI output, SSI pages, and server-generated directory listings will generally not use Keep-Alive connections to HTTP/1.0 clients. For HTTP/1.1 clients, persistent connections are the default unless otherwise specified. If the client requests it, chunked encoding will be used in order to send content of unknown length over persistent connections.
Description: | Amount of time the server will wait for subsequent requests on a persistent connection |
---|---|
Syntax: | KeepAliveTimeout seconds |
Default: | KeepAliveTimeout 15 |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
The number of seconds Apache will wait for a subsequent request before closing the connection. Once a request has been received, the timeout value specified by the Timeout
directive applies.
Setting KeepAliveTimeout
to a high value may cause performance problems in heavily loaded servers. The higher the timeout, the more server processes will be kept occupied waiting on connections with idle clients.
Description: | Restrict enclosed access controls to only certain HTTP methods |
---|---|
Syntax: | <Limit method [method] ... > ... </Limit> |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
Access controls are normally effective for all access methods, and this is the usual desired behavior. In the general case, access control directives should not be placed within a <Limit>
section.
The purpose of the <Limit>
directive is to restrict the effect of the access controls to the nominated HTTP methods. For all other methods, the access restrictions that are enclosed in the <Limit>
bracket will have no effect. The following example applies the access control only to the methods POST
, PUT
, and DELETE
, leaving all other methods unprotected:
<Limit POST PUT DELETE>
Require valid-user
</Limit>
The method names listed can be one or more of: GET
, POST
, PUT
, DELETE
, CONNECT
, OPTIONS
, PATCH
, PROPFIND
, PROPPATCH
, MKCOL
, COPY
, MOVE
, LOCK
, and UNLOCK
. The method name is case-sensitive. If GET
is used it will also restrict HEAD
requests. The TRACE
method cannot be limited.
<LimitExcept>
section should always be used in preference to a <Limit>
section when restricting access, since a <LimitExcept>
section provides protection against arbitrary methods.
Description: | Restrict access controls to all HTTP methods except the named ones |
---|---|
Syntax: | <LimitExcept method [method] ... > ... </LimitExcept> |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
<LimitExcept>
and </LimitExcept>
are used to enclose a group of access control directives which will then apply to any HTTP access method not listed in the arguments; i.e., it is the opposite of a <Limit>
section and can be used to control both standard and nonstandard/unrecognized methods. See the documentation for <Limit>
for more details.
For example:
<LimitExcept POST GET>
Require valid-user
</LimitExcept>
Description: | Determine maximum number of internal redirects and nested subrequests |
---|---|
Syntax: | LimitInternalRecursion number [number] |
Default: | LimitInternalRecursion 10 |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
Compatibility: | Available in Apache 2.0.47 and later |
An internal redirect happens, for example, when using the Action
directive, which internally redirects the original request to a CGI script. A subrequest is Apache's mechanism to find out what would happen for some URI if it were requested. For example, mod_dir
uses subrequests to look for the files listed in the DirectoryIndex
directive.
LimitInternalRecursion
prevents the server from crashing when entering an infinite loop of internal redirects or subrequests. Such loops are usually caused by misconfigurations.
The directive stores two different limits, which are evaluated on per-request basis. The first number is the maximum number of internal redirects, that may follow each other. The second number determines, how deep subrequests may be nested. If you specify only one number, it will be assigned to both limits.
LimitInternalRecursion 5
Description: | Restricts the total size of the HTTP request body sent from the client |
---|---|
Syntax: | LimitRequestBody bytes |
Default: | LimitRequestBody 0 |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
This directive specifies the number of bytes from 0 (meaning unlimited) to 2147483647 (2GB) that are allowed in a request body.
The LimitRequestBody
directive allows the user to set a limit on the allowed size of an HTTP request message body within the context in which the directive is given (server, per-directory, per-file or per-location). If the client request exceeds that limit, the server will return an error response instead of servicing the request. The size of a normal request message body will vary greatly depending on the nature of the resource and the methods allowed on that resource. CGI scripts typically use the message body for retrieving form information. Implementations of the PUT
method will require a value at least as large as any representation that the server wishes to accept for that resource.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
If, for example, you are permitting file upload to a particular location, and wish to limit the size of the uploaded file to 100K, you might use the following directive:
LimitRequestBody 102400
Description: | Limits the number of HTTP request header fields that will be accepted from the client |
---|---|
Syntax: | LimitRequestFields number |
Default: | LimitRequestFields 100 |
Context: | server config |
Status: | Core |
Module: | core |
Number is an integer from 0 (meaning unlimited) to 32767. The default value is defined by the compile-time constant DEFAULT_LIMIT_REQUEST_FIELDS
(100 as distributed).
The LimitRequestFields
directive allows the server administrator to modify the limit on the number of request header fields allowed in an HTTP request. A server needs this value to be larger than the number of fields that a normal client request might include. The number of request header fields used by a client rarely exceeds 20, but this may vary among different client implementations, often depending upon the extent to which a user has configured their browser to support detailed content negotiation. Optional HTTP extensions are often expressed using request header fields.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks. The value should be increased if normal clients see an error response from the server that indicates too many fields were sent in the request.
For example:
LimitRequestFields 50
Description: | Limits the size of the HTTP request header allowed from the client |
---|---|
Syntax: | LimitRequestFieldsize bytes |
Default: | LimitRequestFieldsize 8190 |
Context: | server config |
Status: | Core |
Module: | core |
This directive specifies the number of bytes that will be allowed in an HTTP request header.
The LimitRequestFieldSize
directive allows the server administrator to reduce or increase the limit on the allowed size of an HTTP request header field. A server needs this value to be large enough to hold any one header field from a normal client request. The size of a normal request header field will vary greatly among different client implementations, often depending upon the extent to which a user has configured their browser to support detailed content negotiation. SPNEGO authentication headers can be up to 12392 bytes.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
For example:
LimitRequestFieldSize 4094
Description: | Limit the size of the HTTP request line that will be accepted from the client |
---|---|
Syntax: | LimitRequestLine bytes |
Default: | LimitRequestLine 8190 |
Context: | server config |
Status: | Core |
Module: | core |
This directive sets the number of bytes from 0 to the value of the compile-time constant DEFAULT_LIMIT_REQUEST_LINE
(8190 as distributed) that will be allowed on the HTTP request-line.
The LimitRequestLine
directive allows the server administrator to reduce the limit on the allowed size of a client's HTTP request-line below the normal input buffer size compiled with the server. Since the request-line consists of the HTTP method, URI, and protocol version, the LimitRequestLine
directive places a restriction on the length of a request-URI allowed for a request on the server. A server needs this value to be large enough to hold any of its resource names, including any information that might be passed in the query part of a GET
request.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
For example:
LimitRequestLine 4094
Description: | Limits the size of an XML-based request body |
---|---|
Syntax: | LimitXMLRequestBody bytes |
Default: | LimitXMLRequestBody 1000000 |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
Limit (in bytes) on maximum size of an XML-based request body. A value of 0
will disable any checking.
Example:
LimitXMLRequestBody 0
Description: | Applies the enclosed directives only to matching URLs |
---|---|
Syntax: | <Location URL-path|URL> ... </Location> |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
The <Location>
directive limits the scope of the enclosed directives by URL. It is similar to the <Directory>
directive, and starts a subsection which is terminated with a </Location>
directive. <Location>
sections are processed in the order they appear in the configuration file, after the <Directory>
sections and .htaccess
files are read, and after the <Files>
sections.
<Location>
sections operate completely outside the filesystem. This has several consequences. Most importantly, <Location>
directives should not be used to control access to filesystem locations. Since several different URLs may map to the same filesystem location, such access controls may by circumvented.
<Location>
Use <Location>
to apply directives to content that lives outside the filesystem. For content that lives in the filesystem, use <Directory>
and <Files>
. An exception is <Location />
, which is an easy way to apply a configuration to the entire server.
For all origin (non-proxy) requests, the URL to be matched is a URL-path of the form /path/
. No scheme, hostname, port, or query string may be included. For proxy requests, the URL to be matched is of the form scheme://servername/path
, and you must include the prefix.
The URL may use wildcards. In a wild-card string, ?
matches any single character, and *
matches any sequences of characters.
Extended regular expressions can also be used, with the addition of the ~
character. For example:
<Location ~ "/(extra|special)/data">
would match URLs that contained the substring /extra/data
or /special/data
. The directive <LocationMatch>
behaves identical to the regex version of <Location>
.
The <Location>
functionality is especially useful when combined with the SetHandler
directive. For example, to enable status requests, but allow them only from browsers at foo.com
, you might use:
<Location /status>
SetHandler server-status
Order Deny,Allow
Deny from all
Allow from .foo.com
</Location>
The slash character has special meaning depending on where in a URL it appears. People may be used to its behavior in the filesystem where multiple adjacent slashes are frequently collapsed to a single slash (i.e., /home///foo
is the same as /home/foo
). In URL-space this is not necessarily true. The <LocationMatch>
directive and the regex version of <Location>
require you to explicitly specify multiple slashes if that is your intention.
For example, <LocationMatch ^/abc>
would match the request URL /abc
but not the request URL //abc
. The (non-regex) <Location>
directive behaves similarly when used for proxy requests. But when (non-regex) <Location>
is used for non-proxy requests it will implicitly match multiple slashes with a single slash. For example, if you specify <Location /abc/def>
and the request is to /abc//def
then it will match.
Description: | Applies the enclosed directives only to regular-expression matching URLs |
---|---|
Syntax: | <LocationMatch regex> ... </LocationMatch> |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
The <LocationMatch>
directive limits the scope of the enclosed directives by URL, in an identical manner to <Location>
. However, it takes a regular expression as an argument instead of a simple string. For example:
<LocationMatch "/(extra|special)/data">
would match URLs that contained the substring /extra/data
or /special/data
.
Description: | Controls the verbosity of the ErrorLog |
---|---|
Syntax: | LogLevel level |
Default: | LogLevel warn |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
LogLevel
adjusts the verbosity of the messages recorded in the error logs (see ErrorLog
directive). The following levels are available, in order of decreasing significance:
Level | Description | Example |
---|---|---|
emerg |
Emergencies - system is unusable. | "Child cannot open lock file. Exiting" |
alert |
Action must be taken immediately. | "getpwuid: couldn't determine user name from uid" |
crit |
Critical Conditions. | "socket: Failed to get a socket, exiting child" |
error |
Error conditions. | "Premature end of script headers" |
warn |
Warning conditions. | "child process 1234 did not exit, sending another SIGHUP" |
notice |
Normal but significant condition. | "httpd: caught SIGBUS, attempting to dump core in ..." |
info |
Informational. | "Server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers)..." |
debug |
Debug-level messages | "Opening config file ..." |
When a particular level is specified, messages from all other levels of higher significance will be reported as well. E.g., when LogLevel info
is specified, then messages with log levels of notice
and warn
will also be posted.
Using a level of at least crit
is recommended.
For example:
LogLevel notice
When logging to a regular file messages of the level notice
cannot be suppressed and thus are always logged. However, this doesn't apply when logging is done using syslog
.
Description: | Number of requests allowed on a persistent connection |
---|---|
Syntax: | MaxKeepAliveRequests number |
Default: | MaxKeepAliveRequests 100 |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
The MaxKeepAliveRequests
directive limits the number of requests allowed per connection when KeepAlive
is on. If it is set to 0
, unlimited requests will be allowed. We recommend that this setting be kept to a high value for maximum server performance.
For example:
MaxKeepAliveRequests 500
Description: | Designates an IP address for name-virtual hosting |
---|---|
Syntax: | NameVirtualHost addr[:port] |
Context: | server config |
Status: | Core |
Module: | core |
The NameVirtualHost
directive is a required directive if you want to configure name-based virtual hosts.
Although addr can be hostname it is recommended that you always use an IP address, e.g.
NameVirtualHost 111.22.33.44
With the NameVirtualHost
directive you specify the IP address on which the server will receive requests for the name-based virtual hosts. This will usually be the address to which your name-based virtual host names resolve. In cases where a firewall or other proxy receives the requests and forwards them on a different IP address to the server, you must specify the IP address of the physical interface on the machine which will be servicing the requests. If you have multiple name-based hosts on multiple addresses, repeat the directive for each address.
Note, that the "main server" and any _default_
servers will never be served for a request to a NameVirtualHost
IP address (unless for some reason you specify NameVirtualHost
but then don't define any VirtualHost
s for that address).
Optionally you can specify a port number on which the name-based virtual hosts should be used, e.g.
NameVirtualHost 111.22.33.44:8080
IPv6 addresses must be enclosed in square brackets, as shown in the following example:
NameVirtualHost [2001:db8::a00:20ff:fea7:ccea]:8080
To receive requests on all interfaces, you can use an argument of *
NameVirtualHost *
<VirtualHost>
directiveNote that the argument to the <VirtualHost>
directive must exactly match the argument to the NameVirtualHost
directive.
NameVirtualHost 1.2.3.4
<VirtualHost 1.2.3.4>
# ...
</VirtualHost>
Description: | Configures what features are available in a particular directory |
---|---|
Syntax: | Options [+|-]option [[+|-]option] ... |
Default: | Options All |
Context: | server config, virtual host, directory, .htaccess |
Override: | Options |
Status: | Core |
Module: | core |
The Options
directive controls which server features are available in a particular directory.
option can be set to None
, in which case none of the extra features are enabled, or one or more of the following:
All
MultiViews
. This is the default setting.ExecCGI
mod_cgi
is permitted.FollowSymLinks
Even though the server follows the symlink it does not change the pathname used to match against <Directory>
sections.
Note also, that this option gets ignored if set inside a <Location>
section.
Includes
mod_include
are permitted.IncludesNOEXEC
#exec cmd
and #exec cgi
are disabled. It is still possible to #include virtual
CGI scripts from ScriptAlias
ed directories.Indexes
DirectoryIndex
(e.g., index.html
) in that directory, then mod_autoindex
will return a formatted listing of the directory.MultiViews
mod_negotiation
.SymLinksIfOwnerMatch
<Location>
section.
Normally, if multiple Options
could apply to a directory, then the most specific one is used and others are ignored; the options are not merged. (See how sections are merged.) However if all the options on the Options
directive are preceded by a +
or -
symbol, the options are merged. Any options preceded by a +
are added to the options currently in force, and any options preceded by a -
are removed from the options currently in force.
Mixing Options
with a +
or -
with those without is not valid syntax, and is likely to cause unexpected results.
For example, without any +
and -
symbols:
<Directory /web/docs>
Options Indexes FollowSymLinks
</Directory>
<Directory /web/docs/spec>
Options Includes
</Directory>
then only Includes
will be set for the /web/docs/spec
directory. However if the second Options
directive uses the +
and -
symbols:
<Directory /web/docs>
Options Indexes FollowSymLinks
</Directory>
<Directory /web/docs/spec>
Options +Includes -Indexes
</Directory>
then the options FollowSymLinks
and Includes
are set for the /web/docs/spec
directory.
Using -IncludesNOEXEC
or -Includes
disables server-side includes completely regardless of the previous setting.
The default in the absence of any other settings is All
.
Description: | Selects which authenticated users can access a resource |
---|---|
Syntax: | Require entity-name [entity-name] ... |
Context: | directory, .htaccess |
Override: | AuthConfig |
Status: | Core |
Module: | core |
This directive selects which authenticated users can access a resource. The allowed syntaxes are:
Require user userid [userid] ...
Require group group-name [group-name] ...
Require valid-user
Require
must be accompanied by AuthName
and AuthType
directives, and directives such as AuthUserFile
and AuthGroupFile
(to define users and groups) in order to work correctly. Example:
AuthType Basic
AuthName "Restricted Resource"
AuthUserFile /web/users
AuthGroupFile /web/groups
Require group admin
Access controls which are applied in this way are effective for all methods. This is what is normally desired. If you wish to apply access controls only to specific methods, while leaving other methods unprotected, then place the Require
statement into a <Limit>
section.
Description: | Limits the CPU consumption of processes launched by Apache children |
---|---|
Syntax: | RLimitCPU seconds|max [seconds|max] |
Default: | Unset; uses operating system defaults |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
Takes 1 or 2 parameters. The first parameter sets the soft resource limit for all processes and the second parameter sets the maximum resource limit. Either parameter can be a number, or max
to indicate to the server that the limit should be set to the maximum allowed by the operating system configuration. Raising the maximum resource limit requires that the server is running as root
, or in the initial startup phase.
This applies to processes forked off from Apache children servicing requests, not the Apache children themselves. This includes CGI scripts and SSI exec commands, but not any processes forked off from the Apache parent such as piped logs.
CPU resource limits are expressed in seconds per process.
Description: | Limits the memory consumption of processes launched by Apache children |
---|---|
Syntax: | RLimitMEM bytes|max [bytes|max] |
Default: | Unset; uses operating system defaults |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
Takes 1 or 2 parameters. The first parameter sets the soft resource limit for all processes and the second parameter sets the maximum resource limit. Either parameter can be a number, or max
to indicate to the server that the limit should be set to the maximum allowed by the operating system configuration. Raising the maximum resource limit requires that the server is running as root
, or in the initial startup phase.
This applies to processes forked off from Apache children servicing requests, not the Apache children themselves. This includes CGI scripts and SSI exec commands, but not any processes forked off from the Apache parent such as piped logs.
Memory resource limits are expressed in bytes per process.
Description: | Limits the number of processes that can be launched by processes launched by Apache children |
---|---|
Syntax: | RLimitNPROC number|max [number|max] |
Default: | Unset; uses operating system defaults |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
Takes 1 or 2 parameters. The first parameter sets the soft resource limit for all processes and the second parameter sets the maximum resource limit. Either parameter can be a number, or max
to indicate to the server that the limit should be set to the maximum allowed by the operating system configuration. Raising the maximum resource limit requires that the server is running as root
, or in the initial startup phase.
This applies to processes forked off from Apache children servicing requests, not the Apache children themselves. This includes CGI scripts and SSI exec commands, but not any processes forked off from the Apache parent such as piped logs.
Process limits control the number of processes per user.
If CGI processes are not running under user ids other than the web server user id, this directive will limit the number of processes that the server itself can create. Evidence of this situation will be indicated by cannot fork
messages in the error_log
.
Description: | Interaction between host-level access control and user authentication |
---|---|
Syntax: | Satisfy Any|All |
Default: | Satisfy All |
Context: | directory, .htaccess |
Override: | AuthConfig |
Status: | Core |
Module: | core |
Compatibility: | Influenced by <Limit> and <LimitExcept> in version 2.0.51 and later |
Access policy if both Allow
and Require
used. The parameter can be either All
or Any
. This directive is only useful if access to a particular area is being restricted by both username/password and client host address. In this case the default behavior (All
) is to require that the client passes the address access restriction and enters a valid username and password. With the Any
option the client will be granted access if they either pass the host restriction or enter a valid username and password. This can be used to password restrict an area, but to let clients from particular addresses in without prompting for a password.
For example, if you wanted to let people on your network have unrestricted access to a portion of your website, but require that people outside of your network provide a password, you could use a configuration similar to the following:
Require valid-user
Allow from 192.168.1
Satisfy Any
Since version 2.0.51 Satisfy
directives can be restricted to particular methods by <Limit>
and <LimitExcept>
sections.
Description: | Technique for locating the interpreter for CGI scripts |
---|---|
Syntax: | ScriptInterpreterSource Registry|Registry-Strict|Script |
Default: | ScriptInterpreterSource Script |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
Compatibility: | Win32 only; option Registry-Strict is available in Apache 2.0 and later |
This directive is used to control how Apache finds the interpreter used to run CGI scripts. The default setting is Script
. This causes Apache to use the interpreter pointed to by the shebang line (first line, starting with #!
) in the script. On Win32 systems this line usually looks like:
#!C:/Perl/bin/perl.exe
or, if perl
is in the PATH
, simply:
#!perl
Setting ScriptInterpreterSource Registry
will cause the Windows Registry tree HKEY_CLASSES_ROOT
to be searched using the script file extension (e.g., .pl
) as a search key. The command defined by the registry subkey Shell\ExecCGI\Command
or, if it does not exist, by the subkey Shell\Open\Command
is used to open the script file. If the registry keys cannot be found, Apache falls back to the behavior of the Script
option.
Be careful when using ScriptInterpreterSource Registry
with ScriptAlias
'ed directories, because Apache will try to execute every file within this directory. The Registry
setting may cause undesired program calls on files which are typically not executed. For example, the default open command on .htm
files on most Windows systems will execute Microsoft Internet Explorer, so any HTTP request for an .htm
file existing within the script directory would start the browser in the background on the server. This is a good way to crash your system within a minute or so.
The option Registry-Strict
which is new in Apache 2.0 does the same thing as Registry
but uses only the subkey Shell\ExecCGI\Command
. The ExecCGI
key is not a common one. It must be configured manually in the windows registry and hence prevents accidental program calls on your system.
Description: | Email address that the server includes in error messages sent to the client |
---|---|
Syntax: | ServerAdmin email-address |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
The ServerAdmin
sets the e-mail address that the server includes in any error messages it returns to the client.
It may be worth setting up a dedicated address for this, e.g.
ServerAdmin [email protected]
as users do not always mention that they are talking about the server!
Description: | Alternate names for a host used when matching requests to name-virtual hosts |
---|---|
Syntax: | ServerAlias hostname [hostname] ... |
Context: | virtual host |
Status: | Core |
Module: | core |
The ServerAlias
directive sets the alternate names for a host, for use with name-based virtual hosts.
<VirtualHost *>
ServerName server.domain.com
ServerAlias server server2.domain.com server2
# ...
</VirtualHost>
Description: | Hostname and port that the server uses to identify itself |
---|---|
Syntax: | ServerName fully-qualified-domain-name[:port] |
Context: | server config, virtual host |
Status: | Core |
Module: | core |
Compatibility: | In version 2.0, this directive supersedes the functionality of the Port directive from version 1.3. |
The ServerName
directive sets the hostname and port that the server uses to identify itself. This is used when creating redirection URLs. For example, if the name of the machine hosting the web server is simple.example.com
, but the machine also has the DNS alias www.example.com
and you wish the web server to be so identified, the following directive should be used:
ServerName www.example.com:80
If no ServerName
is specified, then the server attempts to deduce the hostname by performing a reverse lookup on the IP address. If no port is specified in the ServerName
, then the server will use the port from the incoming request. For optimal reliability and predictability, you should specify an explicit hostname and port using the ServerName
directive.
If you are using name-based virtual hosts, the ServerName
inside a <VirtualHost>
section specifies what hostname must appear in the request's Host:
header to match this virtual host.
See the description of the UseCanonicalName
directive for settings which determine whether self-referential URL's (e.g., by the mod_dir
module) will refer to the specified port, or to the port number given in the client's request.
Description: | Legacy URL pathname for a name-based virtual host that is accessed by an incompatible browser |
---|---|
Syntax: | ServerPath URL-path |
Context: | virtual host |
Status: | Core |
Module: | core |
The ServerPath
directive sets the legacy URL pathname for a host, for use with name-based virtual hosts.
Description: | Base directory for the server installation |
---|---|
Syntax: | ServerRoot directory-path |
Default: | ServerRoot /usr/local/apache |
Context: | server config |
Status: | Core |
Module: | core |
The ServerRoot
directive sets the directory in which the server lives. Typically it will contain the subdirectories conf/
and logs/
. Relative paths in other configuration directives (such as Include
or LoadModule
, for example) are taken as relative to this directory.
ServerRoot /home/httpd
-d
option to httpd
ServerRoot
Description: | Configures the footer on server-generated documents |
---|---|
Syntax: | ServerSignature On|Off|EMail |
Default: | ServerSignature Off |
Context: | server config, virtual host, directory, .htaccess |
Override: | All |
Status: | Core |
Module: | core |
The ServerSignature
directive allows the configuration of a trailing footer line under server-generated documents (error messages, mod_proxy
ftp directory listings, mod_info
output, ...). The reason why you would want to enable such a footer line is that in a chain of proxies, the user often has no possibility to tell which of the chained servers actually produced a returned error message.
The Off
setting, which is the default, suppresses the footer line (and is therefore compatible with the behavior of Apache-1.2 and below). The On
setting simply adds a line with the server version number and ServerName
of the serving virtual host, and the EMail
setting additionally creates a "mailto:" reference to the ServerAdmin
of the referenced document.
After version 2.0.44, the details of the server version number presented are controlled by the ServerTokens
directive.
Description: | Configures the Server HTTP response header |
---|---|
Syntax: | ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full |
Default: | ServerTokens Full |
Context: | server config |
Status: | Core |
Module: | core |
This directive controls whether Server
response header field which is sent back to clients includes a description of the generic OS-type of the server as well as information about compiled-in modules.
ServerTokens Prod[uctOnly]
Server: Apache
ServerTokens Major
Server: Apache/2
ServerTokens Minor
Server: Apache/2.0
ServerTokens Min[imal]
Server: Apache/2.0.41
ServerTokens OS
Server: Apache/2.0.41 (Unix)
ServerTokens Full
(or not specified)Server: Apache/2.0.41 (Unix) PHP/4.2.2 MyMod/1.2
This setting applies to the entire server, and cannot be enabled or disabled on a virtualhost-by-virtualhost basis.
After version 2.0.44, this directive also controls the information presented by the ServerSignature
directive.
Description: | Forces all matching files to be processed by a handler |
---|---|
Syntax: | SetHandler handler-name|None |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
Compatibility: | Moved into the core in Apache 2.0 |
When placed into an .htaccess
file or a <Directory>
or <Location>
section, this directive forces all matching files to be parsed through the handler given by handler-name. For example, if you had a directory you wanted to be parsed entirely as imagemap rule files, regardless of extension, you might put the following into an .htaccess
file in that directory:
SetHandler imap-file
Another example: if you wanted to have the server display a status report whenever a URL of http://servername/status
was called, you might put the following into httpd.conf
:
<Location /status>
SetHandler server-status
</Location>
You can override an earlier defined SetHandler
directive by using the value None
.
Description: | Sets the filters that will process client requests and POST input |
---|---|
Syntax: | SetInputFilter filter[;filter...] |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
The SetInputFilter
directive sets the filter or filters which will process client requests and POST input when they are received by the server. This is in addition to any filters defined elsewhere, including the AddInputFilter
directive.
If more than one filter is specified, they must be separated by semicolons in the order in which they should process the content.
Description: | Sets the filters that will process responses from the server |
---|---|
Syntax: | SetOutputFilter filter[;filter...] |
Context: | server config, virtual host, directory, .htaccess |
Override: | FileInfo |
Status: | Core |
Module: | core |
The SetOutputFilter
directive sets the filters which will process responses from the server before they are sent to the client. This is in addition to any filters defined elsewhere, including the AddOutputFilter
directive.
For example, the following configuration will process all files in the /www/data/
directory for server-side includes.
<Directory /www/data/>
SetOutputFilter INCLUDES
</Directory>
If more than one filter is specified, they must be separated by semicolons in the order in which they should process the content.
Description: | Amount of time the server will wait for certain events before failing a request |
---|---|
Syntax: | TimeOut seconds |
Default: | TimeOut 300 |
Context: | server config |
Status: | Core |
Module: | core |
The TimeOut
directive currently defines the amount of time Apache will wait for three things:
We plan on making these separately configurable at some point down the road. The timer used to default to 1200 before 1.2, but has been lowered to 300 which is still far more than necessary in most situations. It is not set any lower by default because there may still be odd places in the code where the timer is not reset when a packet is sent.
Description: | Determines the behaviour on TRACE requests |
---|---|
Syntax: | TraceEnable [on|off|extended] |
Default: | TraceEnable on |
Context: | server config |
Status: | Core |
Module: | core |
Compatibility: | Available in Apache 1.3.34, 2.0.55 and later |
This directive overrides the behavior of TRACE
for both the core server and mod_proxy
. The default TraceEnable on
permits TRACE
requests per RFC 2616, which disallows any request body to accompany the request. TraceEnable off
causes the core server and mod_proxy
to return a 405
(Method not allowed) error to the client.
Finally, for testing and diagnostic purposes only, request bodies may be allowed using the non-compliant TraceEnable extended
directive. The core (as an origin server) will restrict the request body to 64k (plus 8k for chunk headers if Transfer-Encoding: chunked
is used). The core will reflect the full headers and all chunk headers with the response body. As a proxy server, the request body is not restricted to 64k.
Description: | Configures how the server determines its own name and port |
---|---|
Syntax: | UseCanonicalName On|Off|DNS |
Default: | UseCanonicalName On |
Context: | server config, virtual host, directory |
Status: | Core |
Module: | core |
In many situations Apache must construct a self-referential URL -- that is, a URL that refers back to the same server. With UseCanonicalName On
Apache will use the hostname and port specified in the ServerName
directive to construct the canonical name for the server. This name is used in all self-referential URLs, and for the values of SERVER_NAME
and SERVER_PORT
in CGIs.
With UseCanonicalName Off
Apache will form self-referential URLs using the hostname and port supplied by the client if any are supplied (otherwise it will use the canonical name, as defined above). These values are the same that are used to implement name based virtual hosts, and are available with the same clients. The CGI variables SERVER_NAME
and SERVER_PORT
will be constructed from the client supplied values as well.
An example where this may be useful is on an intranet server where you have users connecting to the machine using short names such as www
. You'll notice that if the users type a shortname, and a URL which is a directory, such as http://www/splat
, without the trailing slash then Apache will redirect them to http://www.domain.com/splat/
. If you have authentication enabled, this will cause the user to have to authenticate twice (once for www
and once again for www.domain.com
-- see the FAQ on this subject for more information). But if UseCanonicalName
is set Off
, then Apache will redirect to http://www/splat/
.
There is a third option, UseCanonicalName DNS
, which is intended for use with mass IP-based virtual hosting to support ancient clients that do not provide a Host:
header. With this option Apache does a reverse DNS lookup on the server IP address that the client connected to in order to work out self-referential URLs.
If CGIs make assumptions about the values of SERVER_NAME
they may be broken by this option. The client is essentially free to give whatever value they want as a hostname. But if the CGI is only using SERVER_NAME
to construct self-referential URLs then it should be just fine.
Description: | Contains directives that apply only to a specific hostname or IP address |
---|---|
Syntax: | <VirtualHost addr[:port] [addr[:port]] ...> ... </VirtualHost> |
Context: | server config |
Status: | Core |
Module: | core |
<VirtualHost>
and </VirtualHost>
are used to enclose a group of directives that will apply only to a particular virtual host. Any directive that is allowed in a virtual host context may be used. When the server receives a request for a document on a particular virtual host, it uses the configuration directives enclosed in the <VirtualHost>
section. Addr can be:
*
, which is used only in combination with NameVirtualHost *
to match all IP addresses; or_default_
, which is used only with IP virtual hosting to catch unmatched IP addresses.<VirtualHost 10.1.2.3>
ServerAdmin [email protected]
DocumentRoot /www/docs/host.foo.com
ServerName host.foo.com
ErrorLog logs/host.foo.com-error_log
TransferLog logs/host.foo.com-access_log
</VirtualHost>
IPv6 addresses must be specified in square brackets because the optional port number could not be determined otherwise. An IPv6 example is shown below:
<VirtualHost [2001:db8::a00:20ff:fea7:ccea]>
ServerAdmin [email protected]
DocumentRoot /www/docs/host.example.com
ServerName host.example.com
ErrorLog logs/host.example.com-error_log
TransferLog logs/host.example.com-access_log
</VirtualHost>
Each Virtual Host must correspond to a different IP address, different port number or a different host name for the server, in the former case the server machine must be configured to accept IP packets for multiple addresses. (If the machine does not have multiple network interfaces, then this can be accomplished with the ifconfig alias
command -- if your OS supports it).
The use of <VirtualHost>
does not affect what addresses Apache listens on. You may need to ensure that Apache is listening on the correct addresses using Listen
.
When using IP-based virtual hosting, the special name _default_
can be specified in which case this virtual host will match any IP address that is not explicitly listed in another virtual host. In the absence of any _default_
virtual host the "main" server config, consisting of all those definitions outside any VirtualHost section, is used when no IP-match occurs. (But note that any IP address that matches a NameVirtualHost
directive will use neither the "main" server config nor the _default_
virtual host. See the name-based virtual hosting documentation for further details.)
You can specify a :port
to change the port that is matched. If unspecified then it defaults to the same port as the most recent Listen
statement of the main server. You may also specify :*
to match all ports on that address. (This is recommended when used with _default_
.)
See the security tips document for details on why your security could be compromised if the directory where log files are stored is writable by anyone other than the user that starts the server.